Concept/Nexus 30 Tail Pitch Lever Modification
Kyosho
has discontinued H-3044 (Concept 30) because the Nexus 30 uses a different
setup. Instead of updating my Concept 30 with the Nexus tail
pitch lever setup I simply made my own. I used a flat servo wheel
with two arms, drilled out the center to accept the brass slide bushing.
I then replace the short ball ends with longer ones. I prefer the simplicity
of this modification over the stock Nexus setup. This modification can
use the shorter Concept 30 brass slide bushing or the longer Nexus 30 bushing.
I'll
be adding photos of the actual modification soon.
Back
